< Back to Pipe Products

Concrete Pipe

Circular concrete pipe is manufactured to suit a wide range of project requirements. Because of its rigid characteristics, concrete pipe has minimal dependence on the pipe-soil interaction for its structural strength and, therefore, is not as installation sensitive as flexible pipe materials. Concrete pipe is available in numerous specialty configurations including miter bends, wyes and manhole tees.

Why Concrete Pipe?

People prefer concrete pipe for its durability, its inherent strength, and for being risk-averse to proper placement. The life cycle cost of concrete pipe proves that it is cost-effective and should be demanded for the infrastructure of the future.


Concrete Pipe Applications

  • Storm and Sanitary Gravity Sewers
  • Underground Storage Tanks
  • Culvert Crossings
  • Pedestrian/Wildlife Crossings
  • Low-Head Pressure Pipe

Inland Pipe Manufactures Pipe To Meet The Following Standards:
ASTM C14 Non-Reinforced Concrete Sewer, Storm Drain & Culvert Pipe
ASTM C76 Reinforced Concrete Sewer, Storm Drain & Culvert Pipe
ASTM C361 Reinforced Concrete Low-Head Pressure Pipe
CSA-A257.1 Non-Reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe & Fittings
CSA-A257.2 Reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe & Fittings


Concrete Pipe Drawings

Detailed dimensions are provided on drawings for all our standard Concrete Pipe products to assist with your design projects.
Please contact us if you require additional information.


alberta300 mm 375 mm450 mm525 mm600 mm 
675 mm
750 mm
900 mm
1050 mm
1200 mm
1350 mm
1500 mm
1650 mm
1800 mm
1950 mm
2100 mm
2400 mm2700 mm3000 mm  

Manitoba and Saskatchewan:

Bell & Spigot Pipe
Manitoba and Saskatchewan 300 mm
375 mm450 mm525 mm 
600 mm
750 mm900 mm


Tongue & Groove Pipe

300mm X 1.25m
375mm X 1.25m450mm X 1.25m525mm X 1.25m600mm X 1.25m 
750mm X 1.22m
750mm X 1.83m900mm X 1.22m
900mm X 1.83m
1050mm X 1.22m
1050mm X 1.22m1050mm X 2.44m1200mm X 1.22m1200mm X 2.44m1350mm X 2.44m 
1650mm X 2.44m1800mm X 2.44m2100mm X 2.44m2400mm X 2.44m  



Fill Height Tables

The concrete pipe fill height tables can be used to quickly facilitate selection of the proper reinforced concrete pipe for a given installation condition. The fill height tables are based on the four types of standard installations (bedding and haunching). A Type 1 Installation requires the highest level of compaction and the highest quality granular material. A Type 4 Installation requires the lowest level of compaction and lowest quality granular material. Please note that the tables assume a soil density of 120 lbs/ft3; for other soil densities, designers must accommodate the variation in dead load.

Once bedding type, pipe diameter and fill height are chosen, the fill height tables will provide the required D-Load and the corresponding required class of concrete pipe. If you require help using the concrete pipe fill height tables, please do not hesitate to contact us.

To view an online copy of the concrete pipe fill height tables, click here. Metric fill height tables are also available in the Northern Alberta and Southern Alberta catalogs.



Specialty adaptors are manufactured to connect concrete pipe to incoming or outgoing pipelines of different diameters, known as increasers and decreasers. Caps and plugs are also available to fit over the bell or spigot end of concrete pipe to seal off the pipeline.

For information about adaptors, view our full catalog of products available in your area.